What glue is used for nylon stick magnets? Magnet Sticky Nylon
I. Operation method:
Step 1: Remove dirt, rust, oil, dust, etc. from the surface of the adhesive
Step 2: Squeeze the glue onto the surface of the product to be bonded (coated with continuous glue lines), and then bond the other side of the product and compact it for about one minute. If the product rebounds, use a clamp to position it
Step 3: Use it as much as possible after opening it, but not use it once. When using it again, squeeze out the cured part and continue to use it.
Product introduction: 609 glue is suitable for silicone rubber and metal (iron, copper, stainless steel, aluminum alloy, zinc alloy, electroplated parts, magnets, etc.), plastics (such as ABS, PVC, PC, PS, PPS, TPU, TPE, TPV, TPR, PP, PE, PCB, PU, leather, wood, acrylic, etc.).
Appearance Main ingredients Viscosity Density Surface drying time Complete curing time Adhesive gap Shear strength Working temperature
℃ 至80 ℃ Transparent acrylic acid 40-60mpa.s 1.05 ≤20 seconds 24 hours 0.1mm ≥12Mpa -55 ℃ to 80 ℃
Disclaimer: The information shown above is provided by the members themselves, and the authenticity, accuracy and legality of the content is the responsibility of the posting members. Mills.com is not responsible for this.